Hunan Shinilion Science & Technology Co., Ltd.

Automation for roller shutters

Automation for roller shutters
Product Detailed

Automation for roller shutters
CE,TUV,RoHS,CB
Ensure 20000 times proper working
Low noise<38dB
3-8Nm ,230/110V

Automation for roller shutters ,tubular motor 10Nm

 

Widely used on many roller products: roller doors, roller shutters, curtains, blinds and screens

 

Control mode: remote control, switch, motorized with manual override

 

Tubular motors advantages:

 

Non -malfunction for the brake

Double sided magnetism, cone magnetism, electromagnetism brake system is used in this new type motor in order to meet different customers'requirement. It takes our team many years' research and test for the material of brake system which makes it perfect.

Adopted the plastic sealed technology, all the components have the accurate location dimension, low coefficient of the variation, and the service life time can be amounted to 10 years. Advanced design and crafts, the highest torque

 

Low noise delicate design and manufacture, the lowest noise is less than 38db, nearly silent move is bigger than the similar products in the same condition.ment .

Strong intensity  Adopted the special material, the gear is more wear-resisting, toughness and steel feature is more stronger which will increase the service life of the  gear box.

Oil proof   The sealed structure helped the gear oil hard to leak, ensure the gear works normally longer.

Accurate limit   The accuracy for limit is <+-0.5 degree tolerance, limit configuration by screw pole drive makes accuracy for limit <+- 1.5 degree

Large effective limit   Reasonable and compact design increases effective distance for limit very much, and the effectiveness could reach 50 circles.

Build-in remote control   Good quality and stable receiver built in motor not only shorten the installation time ,Effective distance for remote control system is more than 30m.

 

Voltage: 220/230V

Frequency: 50/60Hz

Power: 135W

Nominal torque: 3 to 10Nm

Nominal speed: 28/32rpmfa

Widely used for small curtain, screen, awning and aluminum roller shutter

Load requirement: Less than 25kg

 

Model SLM35N
 3
 6
 8
 10
 Voltage
 220/230V 110/120V
50/60HZ
 Power ( w)
 101/108
 113/120
 115/120
 115/120
 Current (A)
 ≤05./1.1
 ≤05./1.1
 ≤05./1.1
 ≤05./1.1
 Nominal speed (rpm)
 28/32
 28/32
 28/32
 28/32
 Nominal torque ( Nm )
 3Nm
 6Nm
 8 Nm
 10Nm
 Work time (min )
 4
 4
 4
 4
 Insulation level (class)
 B
 B
 B
 B
 Protection
 IP44
 IP44
 IP44
 IP44
 Tube Diameter
 35mm
 35mm
 35mm
 35mm
 Overall size (mm)
 584
 584
 584
 584
 Weight (kg)
 1.3
 1.3
 1.3
 1.3
 

 

 



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.